How to use your Puribag
A simple 6 step process turns contaminated fresh water into potable, safe drinking water in 30 minutes.
Step 1 - Fill Puribag to indicated line with source water.
Step 2 - Add 1 P&G Purifier of Water sachet to water in the bag. Carefully fold Puribag as indicated and slide purple sealing rod along the folded line of the bag to seal.
Step 3 - Shake Puribag for approximately 5 minutes or until well mixed.
Step 4 - Hang Puribag on tree branch or hook for at least 30 minutes to settle. For very dirty water, allow longer settling time to ensure proper settling of waste material and to avoid filter blocking.
Step 5 - Once settled, gently twist the bag where indicated to separate the waste material from the main bag section. Attached light blue clip to secure the twisted "choke point" of the bag. Once clip is secure, carefully slide the purple sealing rod backwards opening the bottom bag section to release waste material from the bag (please dispose of waste away from water source/ in waste receptacle). Once evacuated, return purple sealing rod to seal the bag.
Step 6 - Remove blue clip from choke point, and allow the back to twist back to rest position. The water is now safe to consume.
n.b. If the water coming out of the tap is still discoloured post treatment, repeat steps 2-6.
Please find below instructions for all our products.
Puribag Membrane Filter - Instructions_ENGLISH
Puribag Pro - Instructions - ENGLISH
Puribag Micro Membrane Filter - Instructions - ENGLISH
Puribag Adventure Bladder - Instructions - ENGLISH
Puribag Adventure Pack - Instructions - ENGLISH
Puribag Pro - Instructions - FRENCH
Puribag Adventure Bladder - Instructions - FRENCH
Puribag Adventure Pack - Instructions - FRENCH
Puribag - Instructions - GERMAN
FAQ
What is the Puribag?
The Puribag is a 10-liter (2.5 gallon) family-sized water purification bag with an internal biodegradable filter.
The Puribag provides a means to capture, treat and store safe drinking water. By removing the particulate matter through the treatment process, the Puribag can store water for up to 3 days.
The Puribag works specifically with the P&G™ Purifier of Water packets.
How does Puribag treat water
The Puribag incorporates a multi-treatment process including the P&G™ Purifier of Water packets (flocculation / disinfection packets) and an in-bag filter. Using the P&G™ Purifier of Water packets, water can be captured and treated, and following a 30-minute process time, contaminants can be removed and clean, safe water remains.
How long does the Puribag take to Purify water?
Total treatment time is 30 minutes.
How much water can I treat using Puribag? Can it be re-used?
The Puribag treats 10-liters (2.5 gallons) of water with each use. Each Puribag comes with 12x P&G™ Purifier of Water packets (a total of 120 liters), as this is the useful life of the internal filter. Each filter is biodegradable and life expansion packs consisting of additional filter cartridges and 12 sachets can be purchased separately.
The Puribag is reusable.
What does the Puribag remove from the water?
The Puribag in combination with the P&G™ packet treatment are robust in removing turbidity, cysts (>3 logs), viruses (>4 logs), bacteria (>6 logs) and arsenic from contaminated water sources such as creeks, rivers, lakes, and ponds. The P&G™ packet treatment meets the US Environmental Protection Agency and World Health Organization emergency drinking water guidelines.
Does the Puribag have any certifications?
Puribag has been awarded a Comprehensive Protection rating from the World Health Organisation.
The P&G™ Purifier of Water packets meet the World Health Organization emergency drinking water guidelines.
What is the shelf life of the Puribag?
The Puribag can be stored at room temperature for 3 years from date of manufacture. P&G™ Purifier of Water Packets can be stored for 3 years from date of manufacture.
Can the Puribag remove salt?
No. The Puribag is not a desalination system. Use the Puribag to treat water from freshwater sources only.
What is the P&G™ Purifier of Water product?
P&G™ Purifier of Water product is a powdered water clarification and disinfectant that comes in small, 4-gram packets. The P&G™ Purifier of Water is engineered to be a mini-water treatment plant in a packet.
What is the P&G™ Purifier of Water remove?
The product removes dirt, cysts, and pollutants, and kills bacteria and viruses in contaminated water. By removing the dirt and sediment through a flocculation/ sedimentation process, P&G™ Purifier of Water gives a visible signal that water is clean and ready to drink.
Where has the P&G™ Purifier of Water product been deployed internationally?
To date, the P&G™ Purifier of Water product has created over 2.5 billion litres of safe drinking water and has been deployed in over 65 countries.
What is in the packet?
Each P&G™ packet contains iron sulfate, calcium hypochlorite, a buffer to maintain pH and a polymer to promote coagulation.
What is the shelf life?
Each P&G™ Purifier of Water packet is stable for 3 years from date of manufacture.
Who manufactures the P&G™ Purifier of Water packets?
The P&G™ Purifier of Water packets are manufactured by Procter & Gamble (P&G™) and available worldwide. Please visit P&G’s Children’s Safe Drinking Water Program’s website for more information on their international work. http://www.csdw.org/